4
To remove the 2.5 inch hard drive from the assembly bracket:
a
Pull one side of the hard drive bracket to disengage the pins on the bracket from the slots on the hard drive [1,2].
b Lift the hard drive out of the hard drive bracket [3].
5
To remove the 3.5 inch hard drive from the assembly bracket:
a
Pull one side of the hard drive bracket to disengage the pins on the bracket from the slots on the hard drive [1,2].
b Lift the hard drive out of the hard drive bracket [3].
24
Removing and Installing components
Need help?
Do you have a question about the Precision 3430 Small Form Factor and is the answer not in the manual?