7
Install the:
a
Hard drive and optical drive module
b
Front bezel
c
Side cover
8
Follow the procedure in
Speaker
Removing speaker
1
Follow the procedure in
2
Remove the:
a
Side cover
b
Front bezel
c
Hard drive and optical drive module
3
To remove the speaker:
a
Disconnect the speaker cable from the connector on the system board [1].
b Press the release tab [2] and pull the speaker out from the system [3].
After working inside your
computer.
Before working inside your
computer.
Removing and Installing components
69
Need help?
Do you have a question about the Precision 3430 Small Form Factor and is the answer not in the manual?