3
Install the:
a
Hard drive and optical drive module
b
Front bezel
c
Side cover
4
Follow the procedure in
M.2 2230 WLAN card - optional
Removing the M.2 2230 WLAN card
1
Follow the procedure in
2
Remove the:
a
Side cover
b
Front bezel
c
Hard drive and optical drive module
3
To remove the M.2 2230 WLAN card:
a
Remove the screw (M2) that secures the WLAN card bracket and the WLAN card to the system board [1].
b Slide and lift the WLANs card bracket off the WLAN card [2].
c
Disconnect the antenna cables from the WLAN card [3].
d Slide and remove the WLAN card out of the WLAN card slot [4].
After working inside your
computer.
Before working inside your
computer.
Removing and Installing components
63
Need help?
Do you have a question about the Precision 3430 Small Form Factor and is the answer not in the manual?