Advertisement
Quick Links
Advertisement
Related Manuals for Brickcom OB-500Af Series
Summary of Contents for Brickcom OB-500Af Series
- Page 1 Easy Installation Guide Megapixel Day & Night Bullet Network Camera OB-500Af Series English...
- Page 2 Step 1.Package Contents Please check to make sure the product package contains all the accessories listed below. a. Network Camera b. Screw bag c. Warranty Card d. Terminal Block e. Dry Bag f. Power Adapter(Optional) g. Bracket h. Product CD i.
- Page 3 Step 2.Hardware Installation WARNING - Do not mount the camera on a soft material. The camera may fall and be damaged. A. Micro-SD/SDHC Card a. Remove the top case from the Bullet Camera. b. (1)Insert the Micro SD/SDHC card into their respective slots. (2) Reattach the Lens cover and secure the cover to the top of the camera device using two screws.
- Page 4 Use the screws to lock the bracket along with the Bullet housing. C. Wall Installation a. Drill three holes into the wall and (2) hammer the supplied plastic anchors into the three holes. (3) Use a screwdriver and the supplied screws to secure the plate to the wall. b.
- Page 5 the RJ45 connector below and refer to step 5 for instructions on how to install the Water Proof Connector. Once the PoE cable has been constructed using the waterproof connector, pass the RJ-45 cable from the camera through the bracket and connect it to the PoE cable. RJ45 Connector Pin No.
- Page 6 i. Use a standard RJ-45 cable to connect the camera to a PoE Injector. ii. Use a standard RJ-45 cable to connect the PoE Injector to the non-PoE switch. iii. Use a standard power cable to connect the PoE Injector to a power outlet. If using the DC12V for the power Supply.
- Page 7 Step 5.Launch EasyConfig Launch the EasyConfig software, and click on the camera from the survey list to connect. Follow the EasyConfig software to configure the camera’s IP address and EasyLink settings. Step 6.Installation Completed Click <Live View> to view the live video feed of the network camera.