Table of Contents
Advertisement
Available languages
Available languages
NAMES OF PARTS
Indoor unit
Air inlet
Air outlet
8
Outdoor unit
Air inlet (side)
Air inlet( rear)
9
Air outlet
10
Display window
Energy saving display(optional):
Displays when the energy saving
feature is activated.(Not available
when the unit does not have energy
saving mode.)
WIFI control display(optional):
Displays when the WIFI control
feature is activated.(Not available
when the unit does not have this
function.)
Names of parts
Indoor unit
1. Front panel
2. Air inlet
3. Air filter
4. Air outlet
5. Horizontal air flow grille
6. Vertical air flow louver(inside)
7. Display window
Outdoor unit
8. Connecting pipe
9. Connecting cable
10. Stop valve
NOTE:
All the pictures in this manual are for
explanation purposes only. The actual shape
of the indoor unit you purchased may be slight
different on front panel and display window.
The actual shape shall prevail.
Display window
Digital display:
Displays the temperature settings when the
air conditioner is operational.
Displays the room temperature in FAN mode.
,
,
Displays the self-diagnostic codes.
Displays
for three seconds when Timer
ON, Fresh, Swing, Turbo or Silence feature is
,
,
activated.
Displays
for three seconds when Timer
OFF is set.
,
,
Displays
for three seconds when Fresh,
Swing, Turbo or Silence feature is cancelled.
,
,
Displays
under defrosting operation.
,
,
Displays
when anti-cold air feature is
activated under heating mode.
,
,
Displays
during self clean operation(if
applicable).
,
,
O
Displays
under 8 C heating operation(if
applicable).
(Optional)
, ,
According to the operation mode, the
indicator displays different colour:
Under Cool or Dry mode, it displays as cool colour.
Under Heat mode, it displays as warm colour.
5 5
NOTE:
A guide on using the infrared remote is included in this literature package.
Operating temperature
Mode
Temperature
Room temperature
Outdoor temperature
temperature cooling system
NOTE:
1. Optimum performance will be achieved within these operating temperatures.If air
conditioner is used outside of the above conditions, certain safety protection features
might come into operation and cause the unit to function abnormally.
2. If the air conditioner runs for a long time in cooling mode and the humidity is high(over
80%)
, condensed water may drip out of the unit. Please sets the vertical air flow louver to
its maximum angle (vertically to the floor), and set HIGH fan mode.
Suggestion: For the unit adopts an Electric Heater, when the outside ambient temperature
O
O
is below 0 C(32 F), we strongly recommend you to keep the machine plugged in order to
guarantee it running smoothly.
Manual operation
Units are equipped with a switch to run emergency operation mode. It can be accessed by
opening the front panel. This switch is used for manual operation in case the remote controller
fails to work or maintenance necessary.
AUTO/COOL
Manual switch
, ,
OPERATING INSTRUCTIONS
Cooling operation
Heating operation Drying operation
O
O
O
O
17 C~32 C
0 C~30 C
O
O
O
(62 F~90 F)
(32 F~86 F)
0
50
-15
30
32
122
5
-15
50
5
122
For the models with low
NOTE: The unit must be turned off before
operating the manual control button. If the
unit is operational, continue pressing the
manual control button until the unit is off.
1
Open and lift the front panel up to an angle
until it remains fixed with a clicking sound.
2
One press of the manual control switch will
lead to the forced AUTO operation. If press
the switch twice within five seconds, the unit
will operate under forced COOL operation.
3
Close the panel firmly to its original
position.
CAUTION:
This switch is used for testing purposes
only. Please do not use it unless necessary .
To restore the remote controller operation,
use the remote controller directly.
6 6
O
O
10 C~32 C
O
O
O
(50 F~90 F)
0
50
86
32
122
Advertisement
Chapters
Table of Contents
