Fishfinder Alarms; Target Depth Id - Raymarine DSM25 Owner's Handbook Manual

46

4.2 Fishfinder Alarms

In addition to the A65 system alarms, the following alarms can be set when you
are connected to a DSM or when the simulator is on. Each alarm can be toggled
ON and OFF and you set the threshold at which the alarms are triggered, except
for the fish alarm.
To modify the Fishfinder Alarms:
1. Press MENU .
2. Use the trackpad or rotary knob to select Alarms Setup.
3. Navigate to Fishfinder Alarms Setup.
ENTER
ENTER
When an alarm is activated, press any key to mute the tone.
You may want to use the shallow and deep water alarms when you are anchored.
Set the limits to just above and below your anchor depth. The sounder triggers an
alarm if the anchor drags and the boats moves into shallower or deeper water.

Target Depth ID

Controls whether the depth of identified targets are displayed. The default setting
is OFF.
Chart Setup...
Fishfinder Setup...
System Setup...
Alarms Setup...
GPS Setup...
Display Setup...
Diagnostics Menu...
User Card Menu...
Alarms Setup
Alarms Setup
Alarms Setup
Alarms Setup
Navigation Alarms Setup...
Fishfinder Alarms Setup...
Setup
Setup
DSM25 Owner's Handbook