Scroll Pause/Resume; Determining Target Depths And Distance - Raymarine DSM25 Owner's Handbook Manual

Chapter 3: Using the Sounder Module

SCROLL PAUSE/RESUME

Select SCROLL PAUSE to pause the display to see a 'snapshot' of the image. This
allows you to inspect the paused image and place waypoints or VRMs. PAUSE
affects all fishfinder windows, including split Frequency, Zoom and Bottom Lock
modes.
When SCROLL PAUSE is selected, the display stops scrolling but the depth
indication continues to be updated. To resume the scrolling bottom display,
toggle to again select SCROLL RESUME.

3.9 Determining Target Depths and Distance

The fishfinder provides various features to determine depths and distances:
200 kHz
Depth line
Depth
Digit
36 8
FISHFINDER
FISHFINDER
SETTINGS
SETTINGS
• Depth Digit displays your current depth. The size of this digit can be
changed via the Fishfinder Setup menu. See
• Depth Lines are horizontal dashed lines drawn at regular intervals to indi-
cate the depth from the surface. These are switched on/off via the Fishfinder
Setup menu. See page 43.
• Target Depth ID displays the depths of recognized targets. These are
switched on/off via the Fishfinder Alarms Setup menu, described on page 46.
30
32
ft
BOTTOM
BOTTOM
ZOOM
ZOOM
LOCK
LOCK
Target
depth ID
12
A-SCOPE
A-SCOPE PRESENTATION
PRESENTATION
Depth Digit Size
on
39
0
20
40
60
Depth
markers
page 43
.