Using Waypoints - Raymarine DSM25 Owner's Handbook Manual

40

3.10 Using Waypoints

Marking a position enables you to return to that spot at a later date. A position is
marked on the screen with a waypoint. When a waypoint is placed, its details are
added to the Waypoint List and a vertical line labelled WPT (see illustration
below) is displayed on screen.
200 kHz
43 9
FISHFINDER
FISHFINDER
SETTINGS
SETTINGS
To place a waypoint:
... at your current position
1. Press WPTS/MOB. The waypoint soft keys are displayed.
2. Press WAYPOINT AT VESSEL. The Edit Waypoints box is displayed.
3. Press ENTER twice to save the waypoint with the standard settings.
... at the cursor
1. So that it is easier to position the cursor over the desired site, press PRESENTA-
TION and then toggle the SCROLL option to PAUSE.
2. Maneuver the cursor to the spot on the screen you would like to mark.
3. Press WPTS/MOB. The waypoint soft keys are displayed.
4. Press WAYPOINT AT CURSOR. The Edit Waypoint box is displayed.
5. Press ENTER twice to save the waypoint with the standard settings.
For greater details of how to place a waypoint, please refer to the Waypoints
chapter of the A65 User's Handbook.
42
44
43
47
ft
ZOOM
ZOOM
WPT
WPT
WPT
WPT
WPT
WPT
34
36
WPT
WPT
44
47
WPT
WPT
BOTTOM
BOTTOM
A-SCOPE
A-SCOPE
LOCK
LOCK
DSM25 Owner's Handbook
0
20
40
43
44
60
PRESENTATION
PRESENTATION