Primary-Secondary Set Up - ADJ FOCUS FLEX L19 User Manual

P R I M A R Y- S E C O N D A R Y S E T U P
This function allows you to link units together to run in a Primary-Secondary set-up, in which one unit
will act as the controlling unit and the others will react to the controlling unit's built-in programs. Any
unit can be configured to act as a Primary or as a Secondary, but only one unit in a given system can
be programmed to act as the Primary.
Primary-Secondary Connections and Settings:
1. Daisy chain your units via the XLR connectors on the rear panels of each unit. Use standard XLR
data cables to link your units together. Remember that the male XLR connector is the input and
the female XLR connector is the ouput. The first unit in the chain (primary) will use the female XLR
connector only. The last unit in the chain will use the male XLR connector only.
2. Use the display screen and control panel to navigate to the Personality > Prim/Sec Mode, and
press ENTER.
3. The fixture can be set to Primary or Secondary. Select one or the other, depending on which mode
you would like the current fixture to use.
4. Make sure that only one unit is designated as the Primary, while all other units are designated as
Secondaries.
5. The secondary units will act in conjunction with the primary unit.
39