Folding; Storage Of Palletank ® Panels And - Sartorius Stedim Biotech Palletank User Manual

Fig. 6
Fig. 7
Fig. 8
Fig. 9
4
c) Position the side panels by sliding these in-between the front and back panels (See Fig. 6)
and secure the four locking system (See Fig. 7).
d) Verify the correct positioning and locking of the panels by trying to removing these.
®
e) Insert the Flexsafe | Flexel
"Instructions for Use" provided with each box of Flexsafe

2.2. Folding

Caution
®
Verify that the "Palletank for Shipping User Manual" have been communicated to the
receiver prior to the shipment arrival.
a) Starting from the unfolded Palletank
b) Remove the four locking systems of the front and back panels (See Fig. 7).
c) Remove first the side panels by sliding these upwards (See Fig. 6).
d) Remove the front and back panels (See Fig. 4 & 5).
2.3. Storage of Palletank ® panels and Shipping Kit components within the Palletank
a) Starting from the empty Palletank
steel plate (See Fig. 9 and 10).
b) The dunnage foams should be packed in a polybag prior to being stored in the Palletank
bottom compartment.
® ®
3D bag in the Palletank and fill it according to the
® (See Fig. 8), remove the lid by turning its handle.
® base, insert the Shipping kit foam pad (See Fig. 9) and
® | Flexel ® 3D bags.
® base
®