Lectron EVC27 User Manual page 6

Plan the mounting
WARNING: In areas with frequent thunderstorms, add surge
protection at the service panel for all circuits. Ensure all power and ground
connections, especially those at the breaker and bus bar, are clean and
tight.
CAUTION: Not recommended to be installed in coastal environments with
high humidity or high dust
1. By default, the AC charger has been set to 3 (48A). To adjust the amps,
unscrew and remove the plastic cover from the back of the AC charger,
and turn the dial on the inside to your preferred setting. Note: 48A
requires hardwired installation.
Dial position Current (A)
0
1
2
3
16 A
32 A
40 A
48A (Default, hardwire
installation needed）
Page 5