Installation Requirements; Daily Maintenance - Lectron EVC27 User Manual

Installation requirements

• Disconnect electrical power prior to installing the charging station.
• Be sure to preview the user manual and ensure local building and
electrical codes are reviewed before installing the AC charger.
• The AC charger should be installed by a qualified technician
according to the user manual and local safety regulations.
• Use appropriate protection when connecting to the main power
distribution cable.
• Type B, C or D breaker with the rating current for table should be
installed in the upstream AC distribution box.
• The device shall be mounted at height between 2 ft and 4 ft from
the ground.
• Please keep the charger in a clean area with low humidity. Not
recommended to be installed in coastal environments with high
humidity or high dust.

Daily maintenance

• Avoid moisture or water in the charger. If there is water or moisture
ingress in the charger, it is necessary to immediately power off to avoid
immediate mishap and notify the professionals to carry out maintenance
before the subsequent use.
• Please use the charger properly. Do not hit or press hard on the
enclosure. If it is damaged, please contact a professional technician.
• Avoid placing the charger near hot objects and at high-temperature
locations, and away from dangerous substances such as flammable
gases and corrosive materials.
• Do not put heavy objects on the charger to avoid any accident.
Page 3