Lectron EVC27 User Manual page 10

Wiring the circuits
WARNING: This device must be grounded. Disconnect electrical power
before installing the charging station.
Improper connection of the equipment-grounding conductor would result
in a risk of electric shock. Check with a qualified electrician or serviceman if
you are not sure whether the product is properly grounded. Do not modify
the plug provided with the product – if it doesn't fit the outlet, have a
proper outlet installed by a qualified electrician.
CAUTION: Use appropriate protection when connecting to the main power
distribution cable.
8. For safe use of electricity, please set circuit breaker protection in the
input part of the EV Charger. The wiring is not complicated; you just
need to follow the instructions below: Connect the L1 lead to the grid
L1, connect the L2 lead to the grid L2, connect the PE lead to
the grid PE.
L1 L2 PE
L1 L2 PE
Page 9