Removing & Installing Body Components
Battery
Battery cover
Negative
terminal
#
Removal
Make sure the ignition switch is in the OFF
position.
Remove the seat.
1.
Remove the battery cover by removing
2.
the screw.
Battery cover screw
Battery
Positive
terminal
P. 52
2
Disconnect the negative - terminal from
3.
the battery.
Disconnect the positive + terminal from
4.
the battery.
Remove the battery taking care not to
5.
drop the terminal nuts.
#
Installation
Install the parts in the reverse order of
removal. Always connect the positive +
terminal first. Make sure that bolts and nuts
are tight.
Tighten the battery cover screw.
Torque: 0.7 lbf·ft (1 N·m, 0.1 kgf·m)
Make sure the clock information is correct
after the battery is reconnected.
For proper handling of the battery, see
"Maintenance Fundamentals."
"Battery Goes Dead."
P. 19
2
P. 41
2
P. 93
2
51