Removal
Place your vehicle on a firm, level surface.
1.
Support your vehicle securely and raise
2.
the rear wheel off the ground using a
maintenance stand or a hoist.
Remove the rear brake adjusting nut.
3.
Disconnect the brake rod from the brake
4.
arm.
Disconnect the brake stopper arm from
5.
the brake panel by removing the cotter
pin, stopper arm nut, washer and rubber
grommet.
Tire Puncture
Loosen the axle holding bolt.
6.
Brake arm
Brake rod
Cotter
pin
Rear brake
adjusting nut
Removing Wheels
u
Rear axle shaft
Axle holding
bolt
Stopper arm nut
Brake stopper arm
Continued
89