Honda Shadow Phantom 2020 Manual page 61

Remove the oil filter with a filter wrench
6.
and let the remaining oil drain out. Make
sure the prior seal is not stuck to the
engine.
Discard the oil and oil filter at an
u
approved recycling center.
Apply a thin coat of engine oil to the
7.
rubber seal of a new oil filter.
8.
Torque: 19 lbf·ft (26 N·m, 2.7 kgf·m)
9.
Torque: 21 lbf·ft (29 N·m, 3.0 kgf·m)
Rubber
10.
seal
Required oil
Oil filter
11.
12.
Engine Oil Changing Engine Oil & Filter
u
Install the new oil filter and tighten.
Install a new sealing washer onto the
drain bolt. Tighten the drain bolt.
Fill the crankcase with the recommended
oil ( P. 44, P. 122) and install the oil fill
2 2
cap/dipstick.
When changing oil & engine oil
filter:
2.7 US qt (2.6 L)
When changing oil only:
2.6 US qt (2.5 L)
Check the oil level.
2
Check that there are no oil leaks.
P. 56
59