Honda Shadow Phantom 2020 Manual page 92

Tire Puncture Removing Wheels
u
While holding the other end of the rear
7.
axle shaft with a wrench, remove the rear
axle nut.
Pull the rear axle shaft out and remove
8.
the side collar.
Move the wheel to the right to separate it
9.
from the final drive gear case.
Remove the wheel.
10.
90
Installation
Before installing the wheel, check that the
wheel hub and final drive gear splines are
coated with molybdenum disulfide paste.
Recommended molybdenum disulfide
paste:
(USA only) Pro Honda Moly 60 Paste or
equivalent
Rear
Position the wheel between the swingarm
1.
axle nut
and the final drive gear case.
Be sure the splines on the wheel hub
u
fit into the final drive gear case.
Install the side collar into the brake panel.
2.
Insert the rear axle shaft from the right
3.
side, through the right swingarm, brake
panel, wheel hub and final drive gear
case.