Honda Shadow Phantom 2020 Manual page 96

Electrical Trouble
#
Headlight Bulb
Headlight bolts
Headlight
Seat rubber
94
Burned-out Light Bulb
u
Connector
TOP
mark
Bulb
Pin
Remove the headlight bolts from the
1.
headlight case.
Gently pull the lower end of the headlight
2.
forward and remove the headlight.
Disconnect the connector.
3.
Remove the seat rubber.
4.
Unhook the pin and remove the bulb.
5.
Install a new bulb and parts in the reverse
6.
order of removal.
Install the seat rubber with its TOP
u
mark facing up.
Tighten the headlight bolts.
7.
Torque: 3.0 lbf·ft (4.1 N·m, 0.4 kgf·m)
Do not touch the glass surface with your
fingers. If you touch the bulb with your bare
hands, clean it with a cloth moistened with
isopropyl (rubbing) alcohol.