Honda Shadow Phantom 2020 Manual page 21

To set the clock:
Turn the ignition switch to the ON position.
a
Select the digital clock mode.
b
Press and hold the Select/Reset button until
c
the hour digits start flashing.
Press the Select/Reset button until the
d
desired hour is displayed.
Press and hold the Select/Reset button. The
e
minute digits start flashing.
Press the Select/Reset button until the
f
desired minute is displayed.
Press and hold the Select/Reset button until
g
the display stops flashing. The clock is set.
The time can also be set by turning the
u
ignition switch to the OFF position.
The display will stop flashing
u
automatically and the adjustment will be
cancelled if the button is not pressed for
about 30 seconds.
19