Removing & Installing Body Components; Battery - Honda CRF250RLA Owner's Manual

Removing & Installing Body Components

Battery

Negative terminal
Battery
Battery holder
# Removal
Make sure the ignition switch is in the
(Off) position.
Remove the left side cover.
1.
Positive terminal
Bolts
P. 57
2
Remove the bolts.
2.
Remove the battery holder.
3.
Disconnect the negative - terminal from
4.
the battery.
Disconnect the positive + terminal from
5.
the battery.
Remove the battery taking care not to
6.
drop the terminal nuts.
#
Installation
Install the parts in the reverse order of
removal. Always connect the positive +
terminal first. Make sure that bolts and nuts
are tight.
Make sure the clock information is correct
after the battery is reconnected.
For proper handling of the battery, see
"Maintenance Fundamentals."
"Battery Goes Dead."
P. 24
2
P. 45
2
P. 92
2
55