Table of Contents
Advertisement
Using the display and keypad
In this chapter
This chapter describes how to use the built-in display menu system of the EXPLORER 500.
It contains an overview of the entire menu system followed by a description of each menu.
It also explains the symbols and messages that may appear in the display, and describes how to
navigate using the keypad.
Menu overview
Main menu
The items of the main menu are:
MESSAGES
•
shows all incoming SMS messages and allows you to open or delete each message or delete
all messages.
CONNECT
•
shows a list of the Streaming Profiles that are defined and selected for the LAN interface using
the web interface. The CONNECT menu allows you to start and stop data sessions with the
listed Streaming Profiles.
CALLS
•
shows missed, received and outgoing calls and data sessions.
SETTINGS allows you to
•
• restart the pointing procedure,
• set display backlight and contrast,
• set audio indications on or off,
• enable or disable each interface,
• enable or disable stealth mode (a terminal mode where lights and sound are off),
• set the power up mode, and
• restore settings.
PROPERTIES shows:
•
• known and accepted Bluetooth devices,
• GPS status,
• Terminal information (IP address, hardware and software numbers, IMEI number),
• Mobile numbers
• Voice mail number, and
• a list of active alarms.
TT 98-122274-O
Chapter 3
3
31
Advertisement
Table of Contents
Troubleshooting
