Inmarsat EXPLORER 500 User Manual page 112

10. Select the Primary Profile.
Select a Profile from the Primary scroll list. This Profile is used by the LAN interface as a first
choice, when possible.
There are 4 predefined Profiles: Standard, Streaming 32 kbps, Streaming 64 kbps and
Streaming 128 kbps. Additionally, you can define your own custom Profiles.
Important
For further information on Profiles and Traffic Flow Templates, see Using Profiles on page 127
and Using a Traffic Flow Template on page 130.
11. Select the Secondary Profile.
To select more than one secondary Profile, press and hold Ctrl or Shift while selecting.
Note
The Context Identifiers (CIDs) for the selected primary and secondary Profiles are listed under
Profile CIDs.
12. Click Apply.
Your LAN settings are applied. Note that changes to your Profiles are not activated until you
click Activate.
13. Click Activate if you want to activate the changes to your Profiles.
TT 98-122274-O
If you have selected a Streaming connection as your Primary Profile, the LAN
interface will be running a Streaming connection until you select another
Profile or disconnect the interface. However, if you select one or more
Secondary Profiles, you can set up your Traffic Flow Template so that it will only
use the Streaming Profile for certain types of traffic.
If you have selected both a Primary and one or more Secondary Profiles you must
define a Traffic Flow Template before you can establish a valid connection.
Setting up the interfaces
Chapter 5: Using the web interface
102