Table of Contents
Advertisement
Indicators
This projector has two indicators, each of which shows the operation condition of the projector. The following offer
solutions to possible problems. If these problem persist, turn the projector off and consult your dealer.
Normal condition
POWER
STATUS
Off
Steady red
Blinking green
Blinking green
Steady green
Steady green
Abnormal condition
POWER
STATUS
Steady green
Or
Blinking orange
Steady red
Blinking green
Steady red
Steady green
Blinking green/red
Steady red
Blinking red
Steady red
Steady red
Off
Blinking green/red
Steady
Or
Blinking green/red
Blinking
CONDITION
Stand-by
Lamp stand-by for power-off
Lamp stand-by for power-on
The power is on. (Normal condition)
CONDITION
Abnormal temperature
•
The ventilation grilles is clogged with dust or
dirt.
•
The room temperature is high.
The protection circuit is working or the lamp is in
an abnormal condition.
The lamp operation time exceeds the time
elapsed until the lamp lifetime notice while the
power is on. (See page 68.)
The lamp operation time exceeds the time
elapsed until the lamp lifetime notice while the
power is off. (See page 68.)
The lamp operation time exceeds the time
elapsed until the lamp lifetime. (See page 68.)
The lamp cover isn't closed.
Abnormal.
EN-76
POWER indicator
STATUS indicator
NOTE
The power cannot be turned on by
pressing the POWER button.
The power cannot be turned off by
pressing the POWER button.
POSSIBLE SOLUTION
•
Clean the ventilation grilles.
•
Relocate the projector to a cooler
place.
•
Wait until the STATUS indicator goes
out, then press the POWER button.
•
If the above solution is not effective,
replace the lamp.
Replace the lamp.
Change with a new lamp if this problem
recurs.
Close the cover correctly.
Contact your dealer.
Advertisement
Table of Contents
