Mitsubishi Electric TX20U User Manual page 44

Network settings (continued)
3. Press the ENTER button.
• The SSID screen appears.
4. Press the , , , and
cursor to select the characters or marks to enter,
and press the ENTER button.
• SSID can be set using up to 32 characters
including alphabets (capital/small) or numeric
characters.
key: ............. Shifting the position of enter
cursor to the left for each
character.
key: ............. Shifting the position of enter
cursor to the right for each
character.
DEL key: ......... Deleting the character in the
position of enter cursor for each
character.
caps/CAPS key: Switching an alphabet character
to CAPITAL or small.
NEXT/PREV key: Switching the marks.
SPACE key: .... Inserting a space in the position
of enter cursor.
CLEAR key: .... Deleting all the entered
characters.
• The default SSID is "MITSUBISHI Projector".
5. Select OK to complete the setting with the SSID
stored. Select CANCEL to complete the setting
without storing.
• The display returns to the WIRELESS SETTING
menu after selecting CANCEL.
Channel setting
1. Display the WIRELESS SETTING menu.
2. Press the or button to select CHANNEL.
3. Press the or button to select AUTO or 1 to 11.
• To cancel the setting, press the MENU button.
Encryption setting
1. Display the WIRELESS SETTING menu.
2. Press the or button to select ENCRYPTION.
3. Press the ENTER button.
buttons to move the key
• ENCRYPTION dialog appears.
4. Press the or
encryption.
5. Press the ENTER button.
• The KEY screen appears.
• The keypad on the KEY screen varies depending
on the selected Encryption setting.
• To cancel the setting, press the MENU button.
6. Press the ,
cursor to select the characters or marks to enter,
and press the ENTER button.
• KEY can be set using up to 64 characters
including alphabets (capital/small) or numeric
characters.
key: ............ Shifting the position of enter
key: ............ Shifting the position of enter
DEL key: ......... Deleting the character in the
caps/CAPS key: Switching an alphabet character
NEXT/PREV key: Switching the marks.
SPACE key: .... Inserting a space in the position
CLEAR key: .... Deleting all the entered
7. Select OK to complete the setting with the
ENCRYPTION and KEY stored. Select CANCEL to
complete the setting without storing.
• The display returns to the WIRELESS SETTING
menu after selecting CANCEL.
• The number of characters of KEY varies
depending on the ENCRYPTION setting.
• WEP 128bit(ASCII): 13 chars
• WEP 64bit(ASCII): 5 chars
• WEP 128bit(HEX): 26 digits
• WEP 64bit(HEX): 10 digits
• WPA-PSK(ASCII): 8-63 chars
• WPA2-PSK(ASCII): 8-63 chars
EN-44
button to select OFF or the other
, , and buttons to move the key
cursor to the left for each
character.
cursor to the right for each
character.
position of enter cursor for each
character.
to CAPITAL or small.
of enter cursor.
characters.