Mitsubishi Electric TX20U User Manual page 55

Advanced display utilities (continued)
7. Click [Add...].
• The "Select Users" window is displayed.
8. Enter the user account name configured in the "1.
Creating a user account" (see page 54) in the
textbox and click [OK].
• The "Remote Desktop Users" window is
displayed.
9. Click [OK].
• The "System Properties" window is displayed.
10.Click [OK].
In Windows XP
1. Select [Start]-[Control Panel].
2. Click [Performance and Maintenance].
• When using Classic View, double-click the
System icon and go to step 4.
3. Click [System].
• The "System Properties" window is displayed.
4. Click the [Remote] tab and check the [Allow users to
connect remotely to this computer] checkbox.
5. Click [Select Remote Users...].
• The "Remote Desktop Users" window is
displayed.
6. Perform steps 7-10 in the section "
Vista, Windows 7, Windows Server 2008 R2 or
Windows MultiPoint Server."
3. Configuration of Windows Firewall
Configure Windows Firewall as follows.
In Windows 7, Windows Server 2008 R2 or
Windows MultiPoint Server
1. Select [Start]-[Control Panel].
2. Select [System and Security].
3. Select [Allow a program through Windows Firewall].
• The "Allowed Programs" window is displayed.
4. Check the [Remote Desktop] checkbox and the
[Home/Work (Private)] and [Public] checkboxes on
the same line, and click [OK].
In Windows Vista
1. Select [Start]-[Control Panel].
2. Select [Allow a program through Windows Firewall].
• When using Classic View, double-click the
Windows Firewall icon and select [Allow a
program through Windows Firewall] on the upper
left of the window.
• The"Windows Firewall Settings" window is
displayed.
EN-55
In Windows