Table of Contents
Advertisement
Advanced display utilities
USB Display
You can project the computer images inputted via a
USB connection.
Supported OS's are as follows:
• Windows XP
• Windows Vista
• Windows 7
• Mac OS X 10.5 or later
Important:
• You need to install the driver only when using MAC
OS X.
• Mac computers based on the PowerPC processors
are not supported.
• Only 1-to-1 screen projection is supported.
• Moving images cannot be displayed.
Connection
Connect the projector and the computer using a
commercially available USB cable.
You can set the network of the projector using the
menu.
Computer
Important:
• The USB-B terminal on this projector is compatible
with USB 2.0.
• Do not use a USB hub between the projector and
the computer.
To USB-B
USB 4-pin
terminal
(type B)
USB 4-pin
USB cable
(type A)
(option)
To USB port
Installation of driver
When using Mac OS X, install the driver after
connecting the projector and the computer using a USB
cable for the first time. Once you have installed the
driver, you don't need to install it again.
Installing USB Display driver
1. Via the Finder, open [USB_DISPLAY] and double-
click [USB Display.pkg].
2. Follow the on-screen instructions to install the driver.
When deleting USB Display driver (Uninstallation)
1. Via the Finder, open the [Applications] folder and
double-click the [USB Display] folder.
2. Double-click [UninstallVendorSpecificType05].
3. Follow the on-screen instructions to uninstall the
driver.
EN-46
Advertisement
Table of Contents
