Mitsubishi Electric TX20U User Manual page 54

Advanced display utilities (continued)
Thin client
Projecting the desktop screen of a remote computer
connected via a network onto the projector, you can
remotely control the remote computer through the
projector.
To use the thin client function, you need to install the
software "ThinClient.exe" contained in the attached
CD-ROM.
Supported OS's are as follows:
• Windows XP (except Home Edition)
• Windows Vista (except Home Basic and Home
Premium)
• Windows 7 (except Starter and Home Premium)
• Windows Server 2008 R2
• Windows MultiPoint Server
Important:
• License terms for Windows XP, Windows Vista and
Windows 7 do not permit simultaneous operation by
multiple users.
• To use the thin client function with Windows Server
2008 R2 or Windows MultiPoint Server, a Client
Access License (CAL) is required. For details, see
"Client Access License (CAL)" on page 58.
Preparation for using Remote Desktop
The thin client function utilizes the standard Microsoft
Remote Desktop function. To use the Remote Desktop
function, perform the following preparations on the
computer.
Important:
• For the following preparations, log on to the
computer using the administrator account.
1. Creating a user account
Important:
• You must configure a password for the user account.
Do not use double-byte characters for the user
account name and password.
2. Configuring Remote Desktop users
Configure the Remote Desktop users as follows.
In Windows Vista, Windows 7, Windows Server
2008 R2 or Windows MultiPoint Server
1. Select [Start]-[Control Panel].
2. In Windows Vista, select [System and Maintenance].
Otherwise, select [System and Security].
• When using Classic View in Windows Vista,
double-click the System icon and go to step 4.
3. Select [System].
4. Click [Remote settings].
5. Select [Allow connections from computers running
any version of Remote Desktop (less secure)].
6. Click [Select Users...].
• The "Remote Desktop Users" window is
displayed.
EN-54