Rtc Battery - HP VR Backpack G2 Maintenance And Service Manual

RTC battery

Before removing the RTC battery, follow these steps:
1. Prepare the computer for disassembly
2. Remove the top cover (see
3. Remove the WLAN antenna (see
Remove the RTC battery:
Disconnect the RTC battery from the system board, and then lift the battery off the main system battery.
▲
Reverse this procedure to install the RTC battery.
(Preparation for disassembly on page
Top cover on page 14).
WLAN antenna on page
14).
21).
Component replacement procedures 23