Table of Contents
Advertisement
1. Turn the power switch "ON". (Twin Shown)
FETCO
2. Prepare a brew basket with the correct size filter and appropriate amount of
coffee.
Ready to Brew
3. Slide the brew basket completely into the rails.
4. Place a clean, empty, preheated dispenser under the brew basket.
STOP
STOP
5. Select a batch & hold the corresponding BREW button in for 1 second to start
6. -STOP button will illuminate,
-Countdown time will display,
-Selected BREW button will flash to indicate brew is in progress.
-All other BREW buttons for that brew head will extinguish.
7. When the brew cycle is finished,
STOP button will extinguish and the BREW button will continue to flash for the
amount of time programmed into the DRIP DELAY setting.
This indicates that coffee may still be dripping from the brew basket
For safety- do not remove brew basket until drip-out is complete.
Twin Brewer ready to brew. Example shown: Pressing top right brew position
Go to fetco.com for the latest versions of all information
Starting The Brew
User Guide & Operator instructions
Page 4
Ready
Brewing
5:30
STOP
STOP
Brewing-see #6
above
P212e0August 2021
Advertisement
Table of Contents
