2.1
Introduction
You can access most of the connectors from the top of the board as it is being
installed in the chassis. If you have a number of cards installed or have a packed
chassis, you may need to partially remove the card to make all the connections.
2.2
USB Ports (HDMI_USB56/LAN34/USB10111213/
LAN1_USB12/LAN2_USB3/USB4/USB89/USB7)
The AIMB-588 provides up to 13 USB ports. (5 x USB3.2 Gen2, 4 x USB2.0 type A
and 1 x USB3.2 Gen2 type C on the rear side, 2 x USB 3.2 Gen1 via internal header
and 1 x USB 3.2 Gen1 via vertical connector) The USB interface complies with USB
Specification Rev 2.0 supporting transmission rates up to 480 Mbps and Rev 3.0 sup-
porting transmission rate up to 5 Gbps, Rev 3.1 Gen2 supporting transmission rate
up to 10 Gbps and is fuse protected. The USB interface can be disabled in the sys-
tem BIOS setup.
The AIMB-588 is equipped with up to one high-performance 1000 Mbps Ethernet
LAN adapters and two 2.5G Mbps Ethernet LAN adapters both of which are sup-
ported by all major network operating systems.
The RJ-45 jacks on the rear panel provides convenient LAN connection.
AIMB-588 User Manual
14