Advertisement

Quick Links

Charge Amps Halo
User
English
Manual
www.chargeamps.com

Advertisement

Table of Contents
loading

Summary of Contents for Charge Amps Halo

  • Page 1 Charge Amps Halo User English Manual www.chargeamps.com...
  • Page 2 Neglecting to follow and carry out the directions, instructions and safety precautions in this User Manual implies that any warranty provisions will be cancelled and that Charge Amps can reject any and all claims for compensation in connection with any injuries/damage or incidents – direct or indirect –...
  • Page 3 Safety WARNING! Read all instructions before installation. • Improper use may create a risk of personal injury. • The product must only be installed by a qualified electrician in accordance with the Installation Manual. • National usage requirements and restrictions apply. •...
  • Page 4: Technical Data

    2 Technical data Charging mode Mode 3 EV power supply identifier Metering 1 to 3 phase voltage, current and power Vehicle connector Type 2, 7.4/11 kW Rated voltage (U 230/400 V Rated insulation voltage (U 250/400 V 4 kV Rated impulse withstand voltage Rated frequency (f 50 Hz Rated current (I...
  • Page 5 RFID Type: ISO/IEC 14443 Typ A 13.56MHz Mifare Range: 13.553 – 13.567 MHz Max output: 31 dBm Wi-Fi Type: 802.11 b/g/n Range: 2400 – 2500 MHz Max output: 20/17/14 dBm@802.11 b/g/n...
  • Page 6: Product Overview

    3 Product overview Centre light and RFID reader Ring light 230 V socket-outlet (some models only) Vehicle connector Vehicle connector holder...
  • Page 7 3.1 Package contents Terminal connector Cable fitting Wi-Fi antenna RFID tag Vehicle connector holder...
  • Page 8 Charge Amps Halo Accessories • 1x RFID tag • 1x Five-pin terminal connector for feed current (comes in different versions). • 2x Cable fitting for power and data. • 1x Wi-Fi antenna • 1x Vehicle connector holder (comes in different versions) •...
  • Page 9 4 Use 4.1 Add RFID tag N.B: Make sure your installer has given you the access to Charge Amps Admin Portal to be able to manage RFID tags. Add RFID tag using the Charge Amps cloud service: https://my.charge.space/admin 4.2 Start and stop charging without RFID identification N.B: The socket-outlet is not available for use while charging...
  • Page 10 4. Disconnect the vehicle connector from the car. 5. After charging, gently wrap the charging cable around Charge Amps Halo (NOTE: to extend the lifetime of the charging cable, wrap the charging cable loosely) and place the vehicle connector in the vehicle connector holder.
  • Page 11 4.4 Cloud connectivity Charge Amps Cloud and Charge Amps App are available for Charge Amps Halo connected to Charge Amps as the cloud provider. Charge Amps App Please download Charge Amps App for full control, adjusting settings and enabling smart charging and scheduling.
  • Page 12 Charging complete White light Steady light (paused by vehicle) Charging paused* Flashing green light Steady light (paused by Halo) * Power allocation can take up to 2 minutes 4.4.2 RFID tag verification Status Centre light Ring light Waiting for RFID tag...
  • Page 13: Maintenance

    • Check that the screw connectors securing the power cables on the underside of the Charge Amps Halo are properly tightened. • The outside of the product, the charging cable and the end of the vehicle connector must be regularly wiped with a clean, dry cloth to remove dirt and dust.
  • Page 14: Product Support And Service

    6 Product support and service If you have any questions or problems with the product, support is always available. To find answers to your questions most quickly: Read through this User Manual to check whether your questions are answered here. If your question is not answered in the User Manual, please: 1.
  • Page 15 Charge Amps AB (publ) Frösundaleden 2B, 8th floor SE–169 75 Solna, Sweden Charge Amps UK Ltd 4th Floor, 3 More London Riverside London SE1 2AQ, United Kingdom Doc. Nr: 130624 © Copyright Charge Amps AB. Rev: 02 All rights reserved...

Table of Contents