Page 3
The instructions in this Halo Pole Mount installation manual. • About Halo Pole Mount Halo Pole Mount expands your mounting options and allows you to place your charging station on a standard pipe of 60 millimeters. Maximum allowed diameter of the post is 61.0 millimeters.
Page 12
Use the 3 pcs M6 x 12 screws in the installation kit to attach the Halo rear housing to the Halo Pole Mount. Remember to put the gasket from the halo package in between the halo rear housing and the Halo Pole Mount.
Page 14
Charge Amps AB can not guarantee that all of the content of this particular document is accurate, up-to-date, and free from printing and proofreading errors.