Site Setup Wizard - D-Link DSL-2750U User Manual

DSL-2750U 3G/ADSL/Ethernet Router with Wi-Fi
and Built-in Switch
User Manual

Site Setup Wizard

To create a virtual server for redirecting incoming Internet traffic to a specified IP address in the
LAN, click the Host site button.
On the opened page, you can specify the following parameters:
Parameter
Name
Interface
Private IP
Remote IP
When needed settings are configured, click the Save button. After that you get to the quick settings
page.
Figure 44. The page for adding a virtual server.
Enter a name for the virtual server for easier identification. You can
specify any name.
Select a WAN connection to which this virtual server will be
assigned.
Enter the IP address of the server from the local area network. To
choose a device connected to the router's LAN at the moment, select
the relevant value from the drop-down list located to the right of the
Private IP field (the field will be filled in automatically).
Enter the IP address of the server from the external network.
Page 50 of 138
Configuring via Web-based Interface
Description