Product Appearance; Front Panel - D-Link DSL-2750U User Manual

3g/adsl/ethernet router with wi-fi and built-in switch
Hide thumbs Also See for DSL-2750U:
Table of Contents

Advertisement

DSL-2750U 3G/ADSL/Ethernet Router with Wi-Fi
and Built-in Switch
User Manual

Product Appearance

Front Panel

LED
Solid green
Power
No light
Solid red
Solid green
LAN 1-4
Blinking green
Solid green
WLAN
Blinking green
Solid green
WPS
Blinking green
Solid green
USB
No light
Solid green
DSL
Blinking green
No light
Solid green
Blinking green
Internet
Solid red
No light
Figure 1. Front panel view.
Mode
The router is powered on.
The router is powered off.
A malfunction of the router.
A device is connected to the port of the router (for the LAN port
configured as the WAN port: the router is connected to an Ethernet
line).
The relevant LAN port is active (upstream or downstream traffic).
The router's WLAN is on.
The WLAN interface is active (upstream or downstream traffic)
A wireless device is connected to the router's WLAN (lights for
several minutes).
Attempting to add a wireless device via the WPS function.
A USB device is connected to the router's USB port.
No USB device.
DSL has been synchronized.
Detecting a carrier signal and synchronizing DSL.
No carrier signal.
A WAN connection (ADSL and/or Ethernet) is established.
The WAN interface is active (upstream or downstream traffic).
An authorization failure.
The router is in the bridge mode or no WAN connection (neither
Ethernet nor ADSL) is established.
Page 11 of 138
Description
Overview

Advertisement

Table of Contents
loading

Table of Contents