D-Link DSL-2750U User Manual page 63

DSL-2750U 3G/ADSL/Ethernet Router with Wi-Fi
and Built-in Switch
User Manual
Parameter
Provider
Connection Type
Port
Name
Enable
Direction
VPI
VCI
Encapsulation Mode
QoS
General settings
Leave the Manually value.
A type of network protocol to be used by the connection. Available
values:
PPPoE
•
PPPoA
•
IPoA
•
Static IP
•
Dynamic IP
•
Bridge.
•
A physical interface to which the new connection will be assigned.
Leave the DSL(new) value to create a new interface at the physical
layer.
A name for connection for easier identification.
Select the checkbox to enable the connection.
The direction of this connection.
ATM
Virtual Path Identifier.
Virtual Circuit Identifier.
Select LLC or VC from the drop-down list.
A class of traffic for this connection.
UBR
(Unspecified Bit Rate): The UBR service is used for applications
that allow various delays and losses of packets. It is appropriate to
use the UBR service for text/data/image transfer applications, as
well as messaging, distribution, retrieval, and remote terminal
applications.
UBR With PCR
(Unspecified Bit Rate with Peak Cell Rate): The UBR service is
used for applications that allow various delays and losses of packets.
The Peak Cell Rate is a determining factor in how often cells are
Page 63 of 138
Configuring via Web-based Interface
Description
The valid range is from 0 to 250.
The valid range is from 32 to 65535.