Recommended Work - KTM 450 SX-F 2020 Owner's Manual

Hide thumbs Also See for 450 SX-F 2020:
Table of Contents

Advertisement

Check all hoses (e.g. fuel, cooling, bleeder, drainage, etc.) and sleeves for cracking,
leaks, and incorrect routing.
Check the antifreeze and coolant level. (
Check the cables for damage and for routing without kinks.
Check that the throttle cables are undamaged, routed without kinks, and set cor-
rectly.
Clean the air filter and air filter box.
Change the glass fiber yarn filling of the main silencer.
Service the fork.
Perform the shock absorber service.
Check the tightness of the easily accessible, safety-relevant screws and nuts.
Change the fuel screen.
(
Check the fuel pressure.
Check the idle speed.
Final check: Check the vehicle for operating safety and take a test ride.
Read out the fault memory using the KTM diagnostics tool after a test ride.
Make a service entry in KTM Dealer.net.
One-time interval
Periodic interval
9.3

Recommended work

Change the front brake fluid.
Change the rear brake fluid.
Change the hydraulic clutch fluid.
Lubricate the steering head bearing.
Service the fork.
Perform the shock absorber service.
Change the fuel filter.
Perform minor engine service, engine has been installed. (Change the spark plug and
spark plug connector. Change the piston, check and measure the cylinder; check the
cylinder head. Check the camshaft, rocker arm and rocker arm shafts. Check timing
assembly.)
p. 104)
(
p. 65)
(
p. 114)
(
p. 80)
(
p. 57)
Every 40 operating hours
Every 30 operating hours
Every 20 operating hours
Every 10 operating hours
After 1 operating hour
p. 67)
Every 100 operating hours
Every 50 operating hours
After 20 operating hours
After 10 operating hours
every 12 months
SERVICE SCHEDULE 9
after every race
35

Advertisement

Table of Contents
loading

This manual is also suitable for:

450 xc-f 2020

Table of Contents