Toshiba HWS-P805XWHM3-E(TR) Service Manual page 200

HWS-P805H8R-E, P1105H8R-E , P1405H8R-E
No. Part name
1 Common procedure
Procedure
WARNING
Stop operation of the air to water and turn off breaker
switch.
CAUTION
Ensure wearing of gloves when performing any work in
order to avoid injury from parts, etc.
1. Detachment
1) Remove the service panel.
(Hexagonal screws Ø4 × 10, 2 pcs.)
• Remove the screws and then pull service panel
downward to remove.
2) Remove the power supply cable and the system
interconnection wire from the cord clamp and the
terminal.
3) Remove the top plate.
(Hexagonal screws Ø4 × 10, 5 pcs.)
2. Attachment
1) Attach the top plate.
(Hexagonal screws Ø4 × 10, 5 pcs.)
2) Connect the power supply cable and the system
interconnection wire to the terminal and then fix
with the cord clamp.
CAUTION
The power supply cable and the system
interconnection wire must be affixed along the
crossover pipe using a commercially available
bundling band so that they do not make contact with
the compressor, gas valve, gas pipe and discharge
pipe.
3) Attach the front panel.
(Hexagonal screws Ø4 ×10, 2 pcs.)
199
Remarks
Service panel Service panel Service panel
Top plate Top plate Top plate