STEP 5
Pull out the Pulse wires (22) through the Front
vertical tube (4) to the top.
Assemble the Handle bar (6) to the Front verti-
cal tube (4) fixing with the Bolts (27) and spring
washers (26).
Finally put on the Handle cover (28) to the han-
dle bar.
STEP 6
Pull out the extended sensor wire (18) and the
pulse wires (22) to connect with the wires of
computer respectively, than fix the computer (9)
onto the computer bracket on the top of Front
vertical tube (4) with screws (35), flat washers
(34).
Your fitness equipment is now ready to use !
6