Alcatel-Lucent ALE-500 User Manual page 76

Do more with your desk phone
3.2.4 PIN code
The PIN code is composed of 4 digits. You can access the VPN configuration by entering the PIN
code or the administrator password if defined by the system. Depending on the VPN configuration,
the PIN code is requested when you boot your desk phone. We recommend you enable this option
for security reasons and if you need your phone in remote and in business place (see: Reconnect
your desk phone in your business place).
If the PIN code is incorrect 5 times in succession, the PIN code and VPN parameters will be erased.
If no administrator password is defined by the system, the PIN code is required to access VPN
configuration.
Once the PIN code and the administrator password have been set, you can switch between the PIN
code and the administrator password by selecting the following softkeys in the login window:
password, Use PIN code.
3.2.5 Reset your PIN code
Access to the administration menu of the desk phone (see chapter below).
•
Remote Config
•
VPN (scroll down the menu).
•
VPN Pincod
•
Enter your PIN
•
Validate.
•
Set new Pincode: enter the new PIN Code.
•
Select this icon to save parameters.
•
The VPN configuration is saved and the main menu is displayed.
•
Select this icon to exit the configuration menu. The desk phone restarts.
•
Enter the PIN code if you have selected the option
•
3.2.6 Reconnect your desk phone in your business place
Your phone is already configured for remote working.
Connect your desk phone to the network (and plug in the power jack if you are using an
•
external power adapter).
If the option to enter PIN code when you boot your desk phone is enabled in the VPN
•
configuration (Request Pincode on
o The PIN code is requested.
Select this icon to go back.
o
o The phone restarts in normal mode. The VPN is temporary disabled until the next
reboot.
If the option is not enabled:
•
o Access to the administration menu of the desk phone (see chapter below).
VPN VPN Config
→
o
o Enter your PIN code.
Validate.
o
Enable VPN: disable the remote worker.
o
8AL90399ENAD ed01
code.
Boot):
(Request Pincode on Boot).
User
76/141