Accessories; Basic Operation - Panasonic PN25168-NZ Installation Manual

1.3 Accessories

Please be sure to confirm the content.
Please contact our distributor if any of the contents are insufficient.
 Installation Guide (this document)
 Rubber foot
 Mounting bracket (for 19-inch rack)
 Screw (for 19-inch rack)
 Screw (for fixing the main unit and 19-inch rack mount bracket)
 Power cord
* Just the PN25168-TH has 1 Installation Guide in Thai (a total of 2 guides).
[Power Cord]
The following power cords are supplied as per the intended nation of delivery.
Product Number
PN25168-TH
PN25168-MY
PN25168-ID
PN25168-SG
PN25168-NZ

1.4 Basic operation

This Product does not have a power ON/OFF switch. Connect the supplied power
cord to this Ethernet Switch and connect the other end into an electric outlet.
This Ethernet Switch operates at AC 100 - 240 V (50/60 Hz).
When power is supplied, all the LEDs are turned ON.
Subsequently, the POWER (power) LED lights up green, and the STATUS (status) LED
lights up orange and the hardware runs a self-diagnostic.
When it is finished, both the the POWER (power) LED and STATUS (status) LED light
up green, and it operates as a Ethernet Switch.
As this Ethernet Switch succeeds in communicating with a terminal connected to
each port, LED of the port lights up.
When the terminal is not operating normally, for example when power is not
supplied to the terminal, LED is not lighted.
* For configuration and management methods, please see the PDF
version of the Operating Instructions on Panasonic's website.
Locale Power Cord Rating
Thailand 250 VAC 6 A
Malaysia 250 VAC 10 A
Indonesia 250 VAC 10 A
Singapore 250 VAC 5 A
Australia 250 VAC 10 A
New Zealand
FUSE Rated Current Plug Type
- TIS166-2549
13 A BS1363
- CEE7/7
5 A BS1363
- AS/NZS 3112
Quantity
1 (*)
4
2
4
8
1
9