Accessories; Basic Operation - Panasonic PN28240i-NZ Installation Manual

1.3 Accessories

Please be sure to confirm the content.
Please contact our distributor if any of the contents are insufficient.
 Installation Guide (this document)
 Rubber foot
 Wall mount bracket
Screw (for fixing the wall mount brackets to the Ethernet Switch)
 Rack mount bracket (for 19-inch rack)
Screw (for 19-inch rack)
Screw (for fixing the mount brackets to the Ethernet Switch)
 Power cord
* Just the PN28240i-TH has 1 Installation Guide in Thailand (a total of 2 guides).
[Power Cord]
The following power cords are supplied as per the intended nation of delivery.
Product Number
PN28240i-TH
PN28240i-MY
PN28240i-ID
PN28240i-SG
PN28240i-NZ
[Optional accessories]
PN54022-XX
PN54024-XX
The XXs are identical to the intended nation of delivery codes.

1.4 Basic operation

This Product does not have a power ON/OFF switch. Connect the supplied power
cord to this Ethernet Switch and connect the other end into an electric outlet.
This Ethernet Switch operates at AC 100 - 240 V (50/60 Hz).
When power is supplied, all the LEDs are turned ON.
Then, PWR LED (Power) lights in green, STATUS/ECO LED (Status/ECO mode) lights
in orange, and self-diagnosis of hardware is executed.
On completion of self-diagnosis, PWR LED (Power) and STATUS/ECO LED
(Status/ECO mode) light in green, and the Ethernet Switch starts operation as a
Ethernet Switch.
When this Ethernet Switch successfully communicates with a terminal connected to a
port, the Port LED lights up.
When the terminal is not operating normally, for example when power is not
supplied to the terminal, the Port LED does not light up.
When the Eco mode is set,Port LED lamps do not light up.
* For the configuration and management methods, please see the PDF
version of the Operating Instructions on Panasonic's website.
Locale Power Cord Rating
Thailand 250 VAC 6 A
Malaysia 250 VAC 10 A
Indonesia 250 VAC 10 A
Singapore 250 VAC 5 A
Australia 250 VAC 10 A
New Zealand
1000BASE-SX SFP Module (i)
1000BASE-LX SFP Module (i)
FUSE Rated Current
- TIS166-2549
13 A BS1363
- CEE7/7
5 A BS1363
- AS/NZS 3112
Quantity
1
(*)
4
2
8
2
4
8
1
Plug Type
9