Panasonic PN25168-NZ Installation Manual page 11

POWER (Power) LED
STATUS (status) LED
PoE LIM. (PoE limit) LED
 POWER (Power) LED
Green Light
Off
 STATUS (status) LED
Green Light
Green Blink
Orange Light
Orange Blink
 PoE LIM. (PoE limit) LED
Off
Green Light
Green Blink
 Port LED (Left)
LINK/ACT (ports 1 - 18) LED
Green Light
Green Blink
Off
 Port LED (Right)
PoE (ports 1 - 16) LED
Green Light
Green Blink
Off
16
: Power is ON.
: Power is OFF.
: System is normally operating
: After powering on, and the system startup is completed, blinks for
five minutes
: System is starting up
: System is malfunctioning
: Supplies power in a range of 0 – 105 W
: Supplies power in a range of 105 W – 112 W
: When the requested power supply capacity exceeds 112 W
(overload of the device overall)
: Link is established.
: Data is being sent/received.
: No terminal is connected.
: Power is supplied normally.
: Overload power supply
: Power is not supplied or PoE receiving equipment is not connected.
Port LED (Left)
Port LED (Right)
11