Viavi OLA-54 Operating Manual page 26

3 G
ETTING
Contact your local Viavi Sales Company for available
adapter types.
To mount the JAE test adapter:
1. Open the head cover and remove the protecting cap
(if still mounted).
2. Place the test adapter vertically on the optical
connector with the locking lever open.
3. Close the locking lever when the test adapter is firmly
seated. You will hear the locking mechanism lock.
4. Repeat the procedure if the device is fitted with two
ports.
5. Fit the fiber optic cable to the test adapter or close the
head cover.
3
2
Fig. 6 Mounting the JAE test adapter
Connecting the OLA-54/-55
The OLA-54/-55 can be operated bidirectionally, i.e. the
two ports can be used interchangeably as input or
output. The symmetrical design means that the
attenuation is not influenced by the direction of the
signal.
20
S
TARTED
OLA-54/-55/-55M Viavi