Other Information; Caller Id Solutions; Battery Solutions; General Product Care - RCA 25413RE3 User Manual

900 mhz cordless handset with caller id for use with model 25413, 25414, or 25415 base units
Hide thumbs Also See for 25413RE3:
Table of Contents

Advertisement

Available languages

Available languages

Other Information

Memory Dialing doesn't work
Did you program the memory location keys correctly?
Did you follow proper dialing sequence?
Unit locks up and no communication between the base and
cordless handset
Unplug the AC power supply from the wall outlet and the back of
the base, and remove the backup batteries from the bottom of
base (if previously installed). Remove the handset battery. Wait
for 30 seconds and plug the power supply back into the base and
wall out, and re-install batteries in the base unit. Reconnect the
handset battery and charge for 12 hours.

Caller ID Solutions

No Display
Is battery fully charged? Try replacing the battery.
Make sure that the unit is connected to a non-switched electrical
outlet. Disconnect the AC power supply from the base and
reconnect it.
Caller ID Error Message
The unit displays this message if it detects anything other than
valid Caller ID information during the silent period after the first
ring. This message indicates the presence of
noise on the line.
No Caller ID
In order to receive Caller ID information, you must subscribe to
the standard name/number Caller ID service from your local
telephone company.

Battery Solutions

If you experience any of the following problems, even after fully
recharging the battery, you may need to replace the battery pack:
Short talk time
Poor sound quality
Limited range

General Product Care

To keep your unit working and looking good, follow these guidelines:
Avoid putting the phone near heating appliances and devices
that generate electrical noise (for example, motors or
fluorescent lamps).
DO NOT expose to direct sunlight or moisture.
Avoid dropping the handset, as well as other rough treatment to
the phone.
Clean the phone with a soft cloth.
Never use a strong cleaning agent or abrasive powder because
this will damage the finish.
Retain the original packaging in case you need to ship the phone
at a later date.
22

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

25414re3H5400re325415re3H5400

Table of Contents