Low Battery Alert - Assa Abloy Corbin Russwin PED5000 Series Installation Instructions Manual

Alarmed exit devices with m61
Hide thumbs Also See for Corbin Russwin PED5000 Series:
Table of Contents

Advertisement

PED4000 / PED5000 Series with M61
Alarmed Exit Devices
Installation Instructions
6
Alarmed Exit (M61) Standard Operating Instructions
To Arm Device
Yellow LED
Turn the key clockwise. The LED will fl ash yellow
(PASSAGE) for 15 seconds (default). A quick chirp will
sound and the LED will fl ash green (ARMED) every 30
seconds. Signal indicates unit is armed.
NOTE: The unit is automatically armed 15 seconds
after the unit is turned on. Field selectable settings
listed on the next page.

Low Battery Alert

The alarm chirps intermittently to indicate low
battery. Change the battery.
Battery: 9 volt akaline battery
For installation assistance contact Corbin Russwin
1-800-543-3658 • techsupport.corbinrusswin@assaabloy.com
Copyright © 2023, ASSA ABLOY Access and Egress Hardware Group, Inc. All rights reserved. Reproduction in whole or in
part without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.
Security / Tamper Violation
Green LED
Red LED
When ARMED, depressing the push rail will activate
the alarm. The alarm will sound and the LED will fl ash
red (VIOLATION). The alarm will continue for
2 minutes (default). After 2 minutes, the LED will
fl ash red every 30 seconds until rearmed using the
key. Turn the key counter clockwise to deactivate the
alarm, then clockwise to rearm.
8
FM618 01/23

Advertisement

Table of Contents
loading

This manual is also suitable for:

Corbin russwin ped4000 series

Table of Contents