Table of Contents
Advertisement
7. Configuration
9. Modify the IP address of the network port of the logger device: the datalogger default
IP address: 192.168.1.254, click "Original tool", click "Network", and configure the IP,
subnet mask, and gateway according to the firewall to ensure that the device can connect to
the network smoothly. Then click "System—Restart" to restart to take effect.
10. IEC104 Modbus-TCP protocol export, click "Interface config" interface.
click "Download point" .
.18.
Advertisement
Table of Contents
Need help?
Do you have a question about the S3-Logger and is the answer not in the manual?
Questions and answers