SOLIS S3-Logger User Manual page 17

Hide thumbs Also See for S3-Logger:

Table of Contents

7. Conﬁguration

3. Conﬁgure the RS485 interface in "Interface conﬁg", connect COM1 and COM2 to the inverter

and EPM, COM3 to the weather station, and COM4 to the electric meter. (If the list of weather

stations and electric meters cannot match the actual application on site. Please feedback the

equipment model and communication protocol to the local technical support, and we will update it

according to the site).

Select COM1, click "Add Device" to add the number of inverters, just select the inverter and

inverter device address. If you want to delete redundant conﬁguration, turn off "YES or NO" to

delete redundant conﬁguration. Similar to weather stations and electricity meters. After the

conﬁguration is complete, click "Reboot" to restart and take effect.

4."Device data" can view the real-time data of the connected device. At the same time, the

inverter can be remotely adjusted and controlled by "Control and Telecontrol".

.14.

Table of Contents

Need help?

Do you have a question about the S3-Logger and is the answer not in the manual?