Disassembling And Replacing The Chain - Technogym Skillrow Technical Service Manual

SKILLROW:
Technical Service Guide - Rev. 1.1
7.5

DISASSEMBLING AND REPLACING THE CHAIN

1. Follow the procedure described at the paragraph
2. Remove the anti-derailment screw and frame. (TOOL: 5mm Allen wrench). The anti-derailment
frame is in proximity of the generator.
3. Release the chain, unhooking the hook.
e-mail: support@technogym.com
Figure 48
"7.3 disassembling the left spiral guard".
Figure 49
Page 79