Configuring Unity Self; Setting Parameters; Setting The Time Period For Sending Data; Displaying The Unity Self Configuration - Technogym Skillrow Technical Service Manual

6.2.5 CONFIGURING UNITY SELF

6.2.5.1 SETTING PARAMETERS

Command
Command @SRTMSOCKET ip_add port#
The parameter ip_add indicates the IP address where the real-time monitor is located. The param-
eter port indicates the UDP port at which the real-time monitor is located.

6.2.5.2 SETTING THE TIME PERIOD FOR SENDING DATA

Command
Command @SRTMPOLLING tsend#
The parameter tsend indicates the time period for sending data to the real-time monitor (ex-
pressed in milliseconds).

6.2.5.3 DISPLAYING THE UNITY SELF CONFIGURATION

Command
Command @RRTMCONFIG#
Page 48
Technical Service Guide - Rev. 1.1
Table 36
Sets the IP address and the UDP port where the
Unity Self is located.
Table 37
Sets the time period for sending data to the Uni-
ty Self.
Displays the configuration of the Unity Self.
Table 38
e-mail: support@technogym.com
SKILLROW:
Notes
Notes
Notes