Table of Contents
Advertisement
Gas Connections
Read and understand your Crystal Fire owner's manual before
beginning burner hookups or using the device.
Do not use Teflon tape or pipe dope on flare fittings.
1. Reach inside the burner cut-out and attach natural gas supply
line using a 3/8" flare fitting, or attach the included black
rubber propane hose and regulator to the bottom fitting of the
control valve.
2. Lay the burner upside down on a flat, soft surface to avoid
scratching the polished metal. Ensure the correct orifice is
installed for the fuel type you are using (see Crystal Fire user
manual included with burner for orifice sizing information).
Attach the included metal flex hose to the burner.
TIGHTEN SECURELY WITH A WRENCH
TIGHTEN SECURELY WITH TWO WRENCHES
Natural gas supply line
or
as specified by local
building codes
7
Propane
input
Natural
gas input
Advertisement
Table of Contents
